The XRS series winch is the ideal combination of speed, innovation and performance for the user. Real gear change, nonmotor acceleration.
Integrated electrical control box, builtin wireless remote control, 3/8 "diameter synthetic cord.The XRS series winches exceed the most demanding standards of today's modern cars while offering affordable fashion design and incorporating many topnotch leading features not found in other high performance winches. Featuring IP67 rating for dust and water resistant operation, and a durable black sand plastic pellet coating complete .
Switch to high speed to pull the synthetic rope in fast. The extralong wiring harness is long enough for any vehicle and makes use of a quickdisconnect winch power cable.
Rated Single Line Pull: 13000lb5896kg 6500lb2948kg
Wire Rope Size / Type: 0.4 X 85 10mmX 28m 0.4 X 85 10mmX 28m Nominal strength=14,400 lb Synthetic Winch Rope
Battery: Recommended: 650CCA minimum for winching
Clutch: Pull and Turn, Ergonomic Free Spooling
Motor: 6.0HP/4.5KW,Series Wound
Fairlead: Aluminium Fairlead
Winch Remote: 2 in 1 remote
Solenoid: Sealed solenoid, relocatable
Line Speed, 0 lbs.: Low speed FPM m/min:34.78ft ; High speed FPM m/min: 63.98ft
Mounting Bolt Pattern: 10.00+0.015x4.5+0.01254x114.3mm
Mounting Hardware: Winch :4x G8, M10X1.75X25mm Fairlead: 2x G8, M12X1.75X25mm
Drum Dia.X L: Diameter 2.563.5mmLength9228mm
The XRS13000 winch uses a 6.0hp sealed motor for reliability and consistent pulling power,safe work and high efficiency.High temperature resistance.
The technology and quality of these contacts resist arching when switching currents.This prevents the contactors from fusing together creating a closed circuit which can potentially damage your winch .Easy connection.All wires of the XRS13000 winch are copper wire.Environmental protection, low resistivity, high strength, low heat, low electrical loss, higher stability.
- 13000LBS winch*1
- Hand switch *1
- Motor Leads *3
- Multifunctional remote control *1
- Aluminium hawse fairlead *1
- Clevis hook *1
- Power leads *1
- Set of bolts *1
- Control box *1
- User manual *1
Using a winch can be dangerous, so be sure to follow the following tips to minimise the risk of personal injury or equipment damage.
Be sure to wear thick work gbeautifuls when handling winches, as cables can easily damage your hands
When rewinding the cable, do not let the cable pass through your hand
If you are using trees as anchors, always wrap tree trunk protectors near the bottom of the ground; Wrap it too high, and there's a lot of leverage that can uproot the tree
For extreme winch conditions, use a heavy blanket, drag or winch to weigh the strained cable. This helps absorb the released energy and makes it more likely to fall to the ground if it is released suddenly and suddenly
When using a winch with others, use a set of agreeing gestures to prevent communication errors
Do not stand on tight winch lines do not straddle the winch line and avoid standing between the towed object and its anchor. If the line gets stuck and hits you, you can easily trip and risk serious injury.
Check the condition of winch regularly; Before each crosscountry drive, check the cable for corrosion, kink or wear, and check the surface of the roller.
Clean the winch regularly if it is dirty, damage will be harder to detect and the dirty metal will rust faster
Never hook the cable on itself as this can cause damage and increase the risk of the clasp always use a tree trunk protector instead
Always make sure the hook opening is facing up if the hook fails, these forces are on the ground and not in the air